Pore Filler

Ideal composite to fill small voids created on the initial grinding pass.

Due to its special formulation, Pore Filler achieves a very stable bond, combined with ground concrete solids.

The resulting slurry dries to demonstrate both high-tensile and pore filling features and a concrete surface that is far easier to polish.

ECOGUARD Pore Filler - Professional results in 1 step!
Hardening of the floor surface
Scratch-free grinding
Fills surface pores up to 5mm deep/wide
Fills craze cracks
Can be tinted with COLOR INFUSION
No harmful vapors
Little to no environmental impact on disposal

APPLICATION

After grinding step MB # 30/40 or 50/60 the water based Pore Filler is sprayed onto the floor surface.
Grind in a cross-grinding pattern using a # 100 specially configured Pore Filler pad.
Achieve a pudding-like mud consistency slurry
Continue to grind until the slurry starts to solidify and dry to a sticky paste.
After 60 minutes or so, dry grind until all residue is completely removed from the surface
Follow up dry with #400 Watergloss pad or equivalent Stingray puck with vacuum running.

FEATURES:

Easy to store
Sold ready-to-use – no dilution needed.
May be tinted with COLOR INFUSION if needed
Contains hardeners & proprietary resin compounds
Heat and acid resistant
Combines with any of the ECOGUARD hardeners to create a water repellent surface
Increases surface abrasion resistance

SPECIFICATIONS:

Tech Data

Safety Data