AVAILABLE INFO FOR ECOGUARDTM CRACK & SURFACE REPAIR KIT:

Tech Data MSDS MSDS Videos

Specs Calculators

Tech Data

MSDS
COMPONENT A

MSDS
COMPONENT B

Videos

Application
Guide

Specs

Calculators

ECOGUARD™ COMPLETE GREEN CONCRETE POLISHING SYSTEM

ECOGUARD Crack & Surface Repair Kit

The GREEN SOLUTION to repair cracks & surface damage

for polished concrete floor surfaces

ECOGUARD™ Crack & Surface repair system is a two part (A & B) resinous compound , which effectively repairs non-moving cracks and surface damage using recycled glass spheres and recollected cement dust from grinding activity. The resulting repairs are virtually invisible and polish to a high gloss finish, matching the surrounding floor.

BENEFITS:

  • Low odor, water base resinous system with 10 min set time
  • Blends very easily with ECOGUARD™ recycled blend of glass spheres and grinding concrete dust.
  • Green solution with no fumes or vapors
  • Fast turnaround
  • Promotes a  virtually invisible repair with excellent color matching compatibility
  • Can be colored to match integral or dyed color concrete floors

 

 

WHEN TO USE

Application:
  • for deep, wide crack in the floor
  • for extremely deep holes
  • Repair of expansion joints
  • as a fast pore filler - UV resistant –color neutral ( no color changes in the floor)
  • For concrete / terrazzo / marble / granite / natural Stone
The Benefits:
  • slightly flexible mass ( 77 – 80 Shore )
  • 100% no shrinkage
  • The mass grows without blistering – best anchorage in the stone
  • easy concrete can be dyed with colors
  • can be colored local in many colors
  • Extremely fast drying - grinding after 20 min dry time

AFTER GRINDING

Vacuum the floor thoroughly. The cracks and holes in the floor thoroughly cleaned seperately. A dust-free floor covering ensurens excellent comletely non-porous result.

HOW TO MIX

MIXTURE :

Pore and Crack Mixture / Repair
1 part Hardener
1 part Resin
Glass Bubbles 
Concrete dust from first grinding
1 part Hardner : 1 part Resin
ex:  50 Gram
ex:  50 Gram
ex: 100 Gram by volume
ex: 100 Gram by volume

MIX WELL

5 – 10 min. processing time. (for 30 and 60 minute set time product)
Attention:  For fast reaction time, apply with a metal trowel.

WAIT TIME

 

 

Conventional fillers have a negative character, they shrink upon curing which causes you to apply a second or third time

Crack & Surface Repair is just the opposite. It expands during the curing process and fills the cracks and holes.
The expansion process anchors the product into all the voids that are being repaired.

The material grows about 3-5 mm higher than the existing floor. Thus ensuring a completely flat surface once the excess material is grinded off.


RESULT


FLAT REPAIRED FLOOR:

Result :

  • a perfectly sealed floor
  • no pores or cracks




Pre-Grind

A water based concentrated, non-hazardous biodegradable cleaning and etching compound.

Read More

Densifier & Hardener

A water based colloidal silicate solution, which is non-hazardous, contains zero VOC's, and creates a permanent integral barrier. 

Read More

Pore Filler

Pore Filler fills cracks, holes, scratches and hardens the surface all in one. It is a must have to develop the highest quality polished overlayment product.

Read More

MaxGloss Primer & Finish

A truly penetrating, non-membrane forming surface protective finish that will absolutely dazzle with brilliance and color enhancement.

Read More

Crack Repair Kit

2 part compound, repairs non-moving cracks and surface damage to match the surrounding floor. 

Read More

Diamond Abrasives

These abrasives are truly revolutionary in design.

Read More

Color Infusion

A uniquely formulated water soluble dye concentrate with better color depth and retention than solvent based dyes and none of the related hazards.

Read More

Maintenance Pads

Diamond abrasive & polishing pads engineered for auto-scrubbers and high speed burnishers

Read More